
BMW Talks Archive
A-C
| C-I
| I-T
| T-Z
Subject:
Re: oil service reset e34
From: "Steve Parry" <k100rs_1990removethis(at)hotmail.com>
Subject: Re: oil service reset e34
Date: Fri, 3 Feb 2006 10:32:58 -0000
Lines: 50
_____________________________________________
"Steve Parry" <k100rs_1990removethis(at)hotmail.com> wrote in message
news:44gpo9F239trU1(at)individual.net...
> "David N Emmet" <dne7697(at)localnet.com> wrote in message
> news:11u5msa3rpcm836(at)corp.supernews.com...
>> My mechanic performed routine oil change and then tried to reset the
>> oil
>> service light with the factory tool and it woulnt take.
>> 95 525i.
>> Any thoughts?
>>
>>
>
> http://www.unofficialbmw.com/e36/electrical/e36_reset_service_lights.html
>
> http://www.bimmerfest.com/forums/archive/index.php/t-11039.html
>
> http://www.unofficialbmw.com/repair_faqs/sil.html
PS note
"Notes on the latest model cars (93 on?):
(can someone please verify this?) It is claimed that the above procedure
doesnt quite work on the most recent model year cars. Instead of waiting
for the lights to go out, you have to disconnect the jumper between 7
and 19 while the ignition is still on.
To reset OIL SERVICE, maintain the connection for approximately 3
seconds.
To reset INSPECTION, maintain the connection for approximately 12
seconds. "
>
> http://www.nmia.com/~dgnrg/diag_s.htm
>
> HTH?
>
--
Steve Parry
K100RS SE & F650
and a 520i SE Touring for comfort
(not forgetting the SK90PY)
http://www.gwynfryn.co.uk
http://www.nwbikers.co.uk

SUBJECT: Re: oil service reset e34
GO >>>

SUBJECT: Oil Service Reset E36
GO >>>
From: <turkoej(at)comcast.net>
Subject: Oil Service Reset E36
Date: Tue, 29 Jul 2003 21:13:29 -0400
Lines: 9
NNTP-Posting-Host: 68.57.44.170
_____________________________________________
I have tried to reset the oil service on my E36 using a jumper between
points 7 and 19, but the lights do not reset. What is the specific sequence
between turning the key to position 2 to installing the jumper and taking it
off. I have put the key in position 2 then installed the jumper for approx.
4 seconds. Removed the jumper and turned the ignition off. When I turned
the ignition back on, the oil service lights still stayed lit. Is there a
good website with this information?
Powered by x801.com